Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Summary of Contents for NEC DV11G
- Page 1 XGA Digital Presenter DV11G User’s Manual English...
-
Page 2: Introduction
The Federal Communications Commission does not allow any modifications or changes to the unit EXCEPT those specified by NEC Soluctions (America), Inc. in this manual. Failure to comply with this government regula- tion could void your right to operate this equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. - Page 3 WARNING Do not use with any power voltage Do not use equipment in places as other than the indicated voltage. follows. The equipment is designed to operate on a power Do not use the equipment in places as follows. Oth- supply of 100-120 or 200-240 V 50/60 Hz AC.
- Page 4 CAUTION Ground equipment properly. Do not carry this equipment by cam- era arm or camera head. Please ground the equipment properly for safety rea- sons. See page E-13 for details. Do not carry this equipment by the camera arm or camera head.
-
Page 5: Notes For Use
Notes for Use Do not locate this equipment in a place where it Do not touch the camera lens directly with your may be exposed to vibration or shocks. hand. Also, do not use this equipment in a place Do not place this equipment subject to vibration from containing much dust or cigarette smoke. -
Page 6: Table Of Contents
Contents Introduction ........................E-2 Safety Notes ......................... E-3 Notes for Use ......................E-5 Contents ........................E-6 Features ........................E-7 On this Manual ......................E-7 Checking of Accessories ....................E-8 Names of Parts ......................E-8 Control Panel......................E-9 Back Panel ......................E-10 Remote Control ....................... -
Page 7: Features
Features High image quality and clear image display Shooting at high image quality of XGA (1024 768) and displaying clear images 45-power zooming The optical 15-power and digital 3-power zoom function allows you to enlarge details of the material. Camera with illumination The light provided on the camera head allows you to use the space freely. -
Page 8: Checking Of Accessories
Checking of Accessories Check the equipment body and the accessories as shown below. If you find any missing item, please contact your dealer and get it supplied. Equipment body Remote control Two SUM-3 (AA) batteries (09N999215) (for remote control) Guarantee policy Power cord RGB signal cable (mini D-sub 15-pin) User’s Manual (this manual) -
Page 9: Control Panel
Control Panel WHITE BALANCE BRIGHTNESS Adjusts the tone of white. Adjusts the brightness of image. ‘AUTO’ ‘AUTO’ Adjusts the tone of white automatically. Before pushing the button, Adjusts the brightness of image au- project a white sheet of paper fully on the screen and adjust the bright- tomatically. -
Page 10: Back Panel
Back Panel USB Port RGB Input Terminal (RGB-IN) Use this terminal when taking the contents of (mini D-sub, 15-pin) image memory of this equipment into a PC. MONITOR Output Terminal Connect the RGB signal cable when projecting Always displays camera image. images from an external image equipment via this equipment. -
Page 11: Remote Control
Remote Control ‘REAL’ Outputs moving images. Remote Control Transmitter ‘FREEZE’ Outputs a still image. Transmits infrared remote con- trol signals. Selects the input to be the source of output. ‘CAMERA’ Selects camera image. ‘EXTERNAL’ Selects image inputted to the RGB input terminal. (NOTE) ‘EXTERNAL’... -
Page 12: Preparations Before Use
Preparations before Use Connecting the Cable and Setting the Output Mode Connect the cable to the equipment that displays the image from this equipment. A selection can be made from the RGB output and the video output. However, it is necessary to set the output method with the dip switch on the back panel before turning on the power to this equipment. -
Page 13: Connecting The Power Cord
For video signal output Set the dip switch 4 to ON. Connect the Video image output terminal to the Video image input terminal of a TV or other image equipment. TV or the like 1 2 3 4 5 6 7 8 Set dip switch 4 to ON. -
Page 14: Setting The Camera Arm
Setting the Camera Arm As illustrated, raise the camera arm gently in the indicated direction while holding the body down with your hand. When the angle between the stage and the camera arm is 60 degrees, there is a click with which the camera arm gets fixed momentarily. -
Page 15: Shooting The Surroundings
Shooting the Surroundings Turn the camera head toward the object you want to shoot. Vertical direction Horizontal direction Normal position NOTE: • The camera head does not turn vertically in your direction (A). Forcible turning may cause trouble. • For turning in the horizontal direction, do so by holding the part B of the camera head. NOTE: •... -
Page 16: Correcting Trapezoidal Distortion At Oblique Shooting
Correcting Trapezoidal Distortion at Oblique Shooting The trapezoidal correction function can be used to correct trapezoidal distortion that occurs when the camera arm is moved from the normal position (60°) to a higher position (80°) and material is shot from an oblieque direc- tion. -
Page 17: Using Image Memory
Using Image Memory You can store images (up to 8 images) in advance and output them later. Storing images q Select the image memory to be used by operating ‘UP’ or WHITE BALANCE SOURCE ‘DOWN’. LIGHT AUTO BLUE CAMERA MEMORY EXTERNAL The No. -
Page 18: Turning Power Off
How to transfer This equipment will be recognized as the drive by “My Computer” on the PC and the contents of image memory are displayed as a JPEG file. Copy the JPEG file and transfer it to your PC. NOTE: •... -
Page 19: Troubleshooting
Troubleshooting Before asking for repair, please make the following checks. If you cannot correct the trouble, contact your dealer. Symptom Check for the cause See page Image is not projected. • Power plug is not properly connected to outlet. E-13 •... - Page 20 Symptom Check for the cause See page Screen blinks. • Darken screen by adjusting brightness to ‘DARK’ side. Drive does not open • Disconnect USB cable once, turn on power to this equipment and connect USB –– when USB-connected. cable again. (NOTE) Memory contents will be erased by turning off power to the equipment.
-
Page 21: Appendixes
Appendixes Specifications General specifications Power requirement 100-120/200-240V AC, 50/60 Hz Power consumption Input current 0.43 A (100-120V AC) / 0.27 A (200-240V AC) Dimensions W420mm D489mm H650mm (service) W420mm D680mm H190mm (storage) Net weight 5.2 kg Optical specifications Lens F1.6-2.6 Shooting range Max. -
Page 22: Dimensions
Dimensions Unit: mm E-22...