Chapter 2 : Preparation; Work Flow; Mount Control Panel On Unit - Sony SR-R4 Operation Manual

Preparation
2
Chapter

Work Flow

The steps that are required before starting to use
the SR-R4 are listed below.
When mounting Control Panel (SRK-CP1,
Option) on the unit
Mount control panel on unit (page 15)
Connect F65 (page 17)
Turn power on (page 21)
Insert SRMemory card (page 22)
When mounting Control Panel (SRK-CP1,
Option) on the F65
Connect F65 (page 17)
Mount control panel on the F65 (page 19)
Turn power on (page 21)
Insert SRMemory card (page 22)
Tip
A Phillips (cross head) screwdriver is required for
mounting the control panel.
Mount Control Panel on
Unit
Attach the CP bracket supplied with the Control
Panel (SRK-CP1, Option) to the unit, and connect
the unit and the control panel with the control
panel cable.
1
Attach the CP bracket supplied with the
control panel to the right side of the
unit.
2
Slide the control panel into the CP
bracket.
Work Flow / Mount Control Panel on Unit
15