Sanyo VCC-ZM400P Service Manual

SERVICE MANUAL

COLOUR CCD Camera

SPECIFICATIONS

Pickup device: 1/4", Effective pixels: 752 (H) x 582 (V)
Horizontal resolution: Over 520 TV lines
Lens: x22 zoom lens, f=3.6-79.2 mm (F1.6-3.8),
Electronic zoom and gearing, Zoom speed setting possible
Electronic zoom: 16 power (combined with optic zoom gives 352 power max)
Max zoom magnification setting possible, Vertical resolution ON/OFF setting
Autofocus: AUTO/MANUAL, AF area setting possible (3 step)
Iris control: AUTO/MANUAL, 1/2 EV steps
Synchronization method: Internal synchronization/Line lock, V phase adjustment possible
Lowest image illumination: 1.2 lx (F 1.6, AGC gain at maximum, COLOR mode)
0.06 lx (F 1.6, B/W mode)
0.04 lx (F1.6, x32 electronic sensitivity increased, COLOUR mode)
0.002 lx (F 1.6, x32 SENSE UP, B/W mode)
S/N: Over 48dB
Backlight compensation: Multi-spot evaluative metering
5 spot centerweighted average metering, 48 multi-spot metering
Day/Night: AUTO/COLOR/B/W settings available
Electric shutter: • Fast shutter speed mode (SHORT);
1/50, 1/120, 1/250, 1/500, 1/1000, 1/2000, 1/4000, 1/10000
• Slow shutter speed mode (LONG); x1, x2, x4, x8, x16, x32
Electronic sensitivity boosting: AUTO/OFF, works with auto iris, Up to x32 max setting possible
White balance: ATW/AWC/MWB, AGC gain: OFF/-6/±0/+6/+9/+12/+15 dB
Motion detector: ON/OFF, ON allows setting of detection patterns on a 48 zone screen for
6 motion settings (size, masking, sensitivity, zoom, interval, alarm sign)
Privacy masking: ON/OFF, max of 4 masked locations, Password lock possible
Alarm input/output (back panel control terminals): Alarm input: 1 (for external alarm switch)
Alarm output: 1 (for sending a signal to the system controller or an alarm
detection device such as a buzzer)
Mirror image effect: Horizontally (H), vertically (V), horizontally and vertically (HV)
Camera ID: ON/OFF, 16 characters
View settings: 9 (0-8) screen files can be established, and each file can set
7 capturing characteristics such as iris
Communications: Coaxial control, RS-485
Operational temperature/humidity: -10 - 50 °C/below 90 % RH
Power source: 24 V AC, 50 Hz/12-15 V DC, Power consumption: 4.5 W, Weight: 380 g
The components designated by a symbol ( ! ) in this schematic diagram designates components whose value are of
special significance to product safety. Should any component designated by a symbol need to be replaced, use only the
part designated in the Parts List. Do not deviate from the resistance, wattage, and voltage ratings shown.
NOTE : 1. Parts order must contain model number, part number, and description.
2. Substitute parts may be supplied as the service parts.
3. N. S. P. : Not available as service parts.
Design and specification are subject to change without notice.
L5AD2/XE
PRODUCT SAFETY NOTICE
FILE NO.
VCC-ZM400P
(Product Code : 117 118 00)
(Europe)
CONTENTS
1. DISASSEMBLY AND
BOARD LOCATION ....................... 2
2. ADJUSTMENT ............................... 3
3. PARTS LIST ................................... 6
CIRCUIT DIAGRAM &
PRINTED WIRING BOARDS ........... C1
REFERENCE No. SM5310469