Checking Part Names And Functions; Inserting An Sd Memory Card - Pioneer AVIC-F130 Owner's Manual

Introduction
Checking part names and
functions
1
1 SD card slot
p An SD memory card containing map
data is inserted at the factory.
p Do not erase the map data stored on the
SD memory card (inserted at the factory).
Without the data, the navigation function
is disabled.
2 Video output selector switch
The switch is used to change the resolution
of video output to the AV receiver.
! When the switch is set to the left,
WQVGA video is output.
! When the switch is set to the right,
WVGA video is output.
3 Reset button
= For details, refer to Resetting the micro-
processor on the next page.
4 Power indicator

Inserting an SD memory card

p The included SD memory card must be in-
2 3 4
1
card slot.
2
spring latch until it stops, then release.
The card will lock firmly into place inside the
SD card slot.
serted into the SD card slot for prior to
using the AVIC-F130 or AVIC-F250 for the
first time.
Insert an SD memory card into the SD
Gently press the card in against the
Chapter
02
15
Engb