Optical Image Stabilizer Lock
In Motion Picture Recording Mode, you can further improve optical image stabilization by
touching and holding
shake that tends to occur when using zoom.
1
Touch
to turn the Image Stabilizer on. (
2
Touch and hold
≥ Icon is displayed in A while you are touching and holding
≥ Optical Image Stabilizer Lock is released when you remove your finger from the icon.
∫ To make the display of
Display of
will not disappear even when no operation is performed for specific time with the
default setting. To make the display of
DISPLAY].
: [SETUP] # [O.I.S. LOCK DISPLAY] # desired setting
MENU
[ON]:
Constantly display.
[OFF]:
The icon will disappear after approx. 5 seconds without any touch operation.
≥ Stabilization may not be possible under strong shaking conditions.
≥ To record while moving the unit quickly, release Optical Image Stabilizer Lock.
. With this function, you can further reduce the effects of the
.
disappear
disappear, change the setting of the [O.I.S. LOCK
- 68 -
66)
l
.