System Connection - Kenwood DNX892 Quick Start Manual

Ñ System connection
1
AV Audio output
Accessory 3
Green/Red
Green/White
1
FM/AM antenna input
2
When connecting to an external amplifier,
connect its ground wire to the car's chassis
to avoid damaging the unit.
22
ñ
English
Accessory =
Accessory 0
2
Audio/Visual Input
(DNX7150BT only)
Visual Output
Rear view camera input
Front view camera input
(DNX892, DNX7150BT
only)
To CMOS-3xx series
(Optional Accessory)
camera control terminal
Rear Audio Preout
Front Audio Preout
Subwoofer Preout
Accessory =
1
2
AV Audio output
Accessory 2
Light Green (Parking sensor wire)
For best safety, be sure to connect
the parking sensor.
Purple/White (Reverse sensor wire)
Blue/Red
(DNX892, DNX7150BT only)
Accessory 0: GPS Antenna
Accessory =:
Bluetooth Microphone
Visual Output
Rear view camera input
Accessory 0
Connect to the vehicle's parking
brake detection switch harness.
PRK SW
Connect to vehicle's reverse
lamp harness when using the
REVERSE
optional rear view camera.
To Relay Box.
If no connections are made,
do not let the cable come out
RELAY
from the tab.