Controlling A Networked Projector Using Crestron Roomview - Epson PowerLite 525W User Manual

4. Select the Others menu and press Enter.
5. Set the setting to On to allow the projector to be detected.
6. Turn off the projector, then turn it on again to enable the setting.
Parent topic: Crestron RoomView Support
Related references
Projector Setup Settings - Extended Menu

Controlling a Networked Projector Using Crestron RoomView

Once you have set up your projector to use Crestron RoomView, you can control and monitor projection
using a compatible web browser.
1. Start your web browser on a computer connected to the network.
2. Type the projector's IP address into the browser's address box and press the computer's Enter key.
67