Epson EX7230 Pro Quick Setup

EX7230 Pro/EX7235 Pro

Quick Setup

Before using the projector, make sure you read the safety instructions in the
online User's Guide.
Connect the projector
Choose from the following connections. See the sections below or the online
User's Guide for details.
Computer
USB port
Connect the square end of a USB cable to the projector's USB-B (square) port.
Connect the flat end of the cable to any USB port on your computer.
Windows XP or later: After turning on the projector, follow the on-screen
®
instructions to install the Epson USB Display software (EMP_UDSE.EXE; only
®
on first connection). If the software screen does not display automatically,
open My Computer or Computer, then double-click EPSON_PJ_UD.
OS X 10.5.1 or higher: After turning on the projector, the setup folder for
USB Display appears in the Finder. Double-click USB Display Installer and
follow the on-screen instructions to install the Epson USB Display software
(only on first connection).
Note: If you have problems installing the USB Display software, make sure the
USB Type B setting in the projector's Extended menu is set to USB Display.
See the online User's Guide for instructions.
Computer port
Connect one end of a VGA cable to the projector's Computer port, and the
other end to your computer's
switch it to external display (see "Troubleshooting"). You can also connect an
audio cable.
HDMI port
Connect one end of an HDMI cable to the projector's HDMI port and the other
end to an HDMI port on your computer.

Video device

Connect up to 4 video devices and use the Source Search button on the
projector or remote control to switch between them.
USB cable
HDMI cable
VGA cable
RCA Audio cable
monitor port. If you are using a laptop,
RCA Audio cable
S-Video cable
HDMI cable
Component video to VGA cable
RCA video cable (composite video)
Mobile media device
Connect tablets, smartphones, and other devices that support the MHL™
standard to the HDMI/MHL port.
Some devices may require an adapter or may not require an MHL cable. Not all
features or functions may be supported. Check your device's documentation for
more information.
Camera, USB device, or Epson DC-06 document camera
Connect a digital camera, USB flash drive, USB storage device, or Epson DC-06
document camera to the projector's USB-A (flat) port.
If you connect a digital camera, USB flash drive, or USB storage device, you can
use the projector's PC Free feature. You can also connect other Epson document
cameras to the projector. See the online User's Guide for details.

Turn on your equipment

1
Turn on your computer or video source.
2
Plug in the projector. The
3
Open the A/V Mute slide all the way.
4
Press the power button on the projector or remote control. The
projector beeps, and the Status light flashes blue and then stays on.
Note: To shut down the projector, press the
unplug it. You don't have to wait for the projector to cool down.
5
The default language of the menu system is English. To select another
language, press the Menu button on the projector or remote control.
Select Extended and press
Select your language and press
the menu system.
MHL cable
power light on the projector turns blue.
power button twice, then
. Select Language and press
. Press the Menu button to exit
.