Samsung SmartCam Quick Start Manual

English
Quick Start Guide for iOS Setup
Before you begin your SmartCam Setup, please:
Have your SmartCam and power adapter ready.

Have your iOS device available to download the SmartCam app.

Make sure you are within range of the same Wi-Fi network you'll use for

your camera.
Have your Wi-Fi network password handy.

If you have questions or need help installing your SmartCam, please
contact our free technical support.
1-877-349-3149 (9am – 9pm EST, Mon – Sun)
Please visit samsungsmartcam.com for full user manual, mobile app
manual and FAQs.
Product Views For Setup
Use the following illustrations to familiarize yourself with the camera setup
parts. For a more detailed diagram, please see User's Manual.
1
6
2
7
3 10
4
5
8
9
1) Camera unit connection port 6) Wi-Fi Direct Button
2) Audio input 7) Power/Wi-Fi Status LED
3) Audio output 8) Reset Button
4) Network Port (Used for wired 9) MicroSD Card Slot (up to 32GB)
connections) 10) Camera
5) Power Input
SNH-E6440BN-Quick Start Guide-ENG-미주.indd 1-5
User Account Setup
Before you begin setting up the camera, you must create an user account.
Follow these easy steps to register your account.
1. 2. 3. 4. Tap <Create new
Go to the App Store Search for "Samsung Open the app.
from your iPhone or SmartCam". account>.
iPad.
5. 6. 7.
Tap <Start>. Enter User ID, Tap <Next> to
Password, valid register your
Name and e-mail camera.
address.
Tap <Register>.
Record your SmartCam information here:
Account Registration
USER ID: ______________________ USER PASSWORD: ____________
8-14 letters or letters with numbers 10-14 letters and numbers combination
Example: johnsmith Example: smartcam123
iOS Wireless Camera Setup
Continue with camera setup by following the app wizard instructions.
1. 2. 3.
Tap <Wireless Connect the power Exit SmartCam app
Setup>.
and press Wi-Fi by pressing the
button on the back home button.
of the camera.
7. 8. 9.
Enter your Wi-Fi When the LED light Create Camera
network password turns green, you Name & Password.
and tap <Next>. will automatically be 1-20 letters and/or
directed to Step 9. numbers.
Password: 1-8
letters and/or
numbers.
Camera Registration
CAMERA NAME: _______________ CAMERA PASSWORD: _________
1-20 letters and/or numbers 1-8 letters and/or numbers
Example: LivingRoom Example: 1234
4. 5. 6.
Go to your phone Find the last 4 digits of your Select your Wi-Fi
SmartCam serial #, then network.
settings. Select
enter password "smartcam".
<Wi-Fi> settings.
Return to SmartCam app.
10. 11. 12.
If you want to Select your Time Enable motion and/
begin viewing Zone and then tap or audio detection to
live video, select <Next>. receive event alerts
<No>. If you on your devices.
want to continue
selecting setting
preferences, select
<Yes>.
You have now successfully completed the SmartCam setup.
SmartCam Control Guide
Once setup is complete and live video appears on your iOS device, tap the
screen to display the SmartCam tool bar. This chart serves as a reference
to navigate onscreen controls and customize your SmartCam experience.
3A
test test
Back Back
a b c d e f g h i j
Number Description
1. Manual Recording Tap to save streaming video onto the SD card
2. Capture Tap to capture and save a still image during monitoring
3. Two-Way Talk Tap to begin and end Two-Way Talk between mobile device and camera
3A. Microphone Button During Two-Way Talk, press Mic Button on screen to talk, release to listen
4. HQ Tap to view the highest video quality available
5. Melody Tap to view and choose melody selection to play through camera
6. Brightness Control Tap to adjust screen image brightness
7. Flip Control Tap to flip screen image vertically or horizontally
Tap to enable Motion Zone Select by drawing up to three boxed areas on your screen for
8. Motion Zone Select
motion alerts in only those specific areas
9. Audio Message
Tap to record up to 10 messages to be played through the camera speakers
Recorder
10. Information Tap to display current audio and video information
2014-08-19 오후 1:51:39