Day/Night Tab; Events Displayed; Privacy Masking Tab - Sony Ipela SNC-VB635 User Manual

Events displayed

Displays in the menu when the type is set to Event.
Select the type of superimpose to be displayed for the
event.
OK/Cancel
See "Buttons common to every menu" on page 22.

Day/Night Tab

Use this tab to set the day/night function of the camera.
Mode
Select the day/night mode. This function has the
following modes.
Auto: Normally works in day mode; switches
automatically to night mode in a dark place.
Sync with IR Illuminator
Supported models: SNC-VB632D/VM632R/
VM602R/EM632R/EM602R/EB632R/EB602R
On: The irradiator works in conjunction with day/
night switching.
Off: Deactivate the irradiator.
IR Illuminator level
Supported models: SNC-VB632D/VM632R/
VM602R/EM632R/EM602R/EB632R/EB602R
This setting is available when Sync with IR
Illuminator is set to On.
Set the infrared intensity of the irradiator.
Note
When the Sync with IR illuminator is used, a close-
up object in images may have blown out highlights.
To avoid blown out highlights, set Wide dynamic
range (View-DR) in the Picture tab of the Video /
Audio menu or Video menu to On.
Threshold
Set the brightness level when the night mode is set.
For SNC-VB632D/VM632R/VM602R/EM632R/
EM602R/EB632R/EB602R, this setting is
available when Sync with IR Illuminator is set to
Off.
Brightness threshold
Supported models: SNC-VB632D/VM632R/
VM602R/EM632R/EM602R/EB632R/EB602R
This setting is available when Sync with IR
Illuminator is set to On.
Set the brightness level when the night mode is set.
Hold time
Set the reaction time of changes in brightness.
Setting the Camera Image and Audio — Video / Audio Menu Setting the Camera Image — Video Menu
Manual: Switch the day/night mode manually.
When the checkbox of the night mode is selected, the
camera works in night mode. Otherwise, the camera
works in day mode.
Timer: Normally the camera works in day mode. It
switches to night mode at the time you set in Timer
of Day/Night in the Schedule menu.
Sensor input:
Supported models: SNC-VB635/VB630/VB600/
VB600B/VB632D/VM630/VM600/VM600B/
VM631/VM601/VM601B/VM632R/VM602R/
XM631
Controls the day/night mode by synchronizing it
with the sensor input.
Select the synchronized sensor from Sensor input 1
and Sensor input 2. While a sensor input is detected,
the camera works in night mode. (Only Sensor input
1 is available for SNC-XM631.)
Status
Displays the day/night function status.
Easy Focus
If you check Day/Night Sync, Easy Focus will operate
together with Day/Night switching, and the focus will
be automatically adjusted.
For details about Easy Focus, refer to "Focus Tab —
Adjusting the Focus" on page 29 and "Focus / Zoom Tab
— Adjusting the focus/zoom" on page 29.
Notes
• The image goes out of focus while Easy Focus is
operating.
• The motion detection alarm does not work while Easy
Focus is operating.
• If you want to check Day/Night Sync, check if the
image is in focus under the monitoring environment
for Day/Night mode in advance.
OK/Cancel
See "Buttons common to every menu" on page 22.

Privacy masking Tab

Using the privacy masking enables you to hide images
by masking specified parts of the images when
streaming.
33