Intended use switches and any other conditions that may affect its operation. Your Black & Decker power inverter is designed to fit into a Do not use the appliance if any part is damaged or cup-holder and convert direct current (dc) to alternating defective.
Page 4
The power inverter output waveform Once you have finished using the inverter make sure that you remove the 12 Vdc accessory plug (3) from the The ac output waveform of the power inverter is known as a 12 Vdc source. “modified sine wave”.
input voltage drops to 10.5 +/- 0.5 Vdc. When the This problem does not occur with the majority of battery conditions are corrected, disconnect from the dc power operated equipment. Most of these devices use a separate source and reconnect. charger or transformer that is plugged into an ac mains Over voltage protection.
Separate collection of used products and packaging EC declaration of conformity allows materials to be recycled and used again. Re- BDPC100C H1 use of recycled materials helps prevent Black & Decker declares that these products conform to: environmental pollution and reduces the demand EN60950, 2006/95/EC for raw materials.
Page 7
To claim on the guarantee, you will need to submit proof of purchase to the seller or an authorised repair agent. You can check the location of your nearest authorised repair agent by contacting your local Black & Decker office at the address indicated in this manual.