Kayba Front Fork Adjustment (Tc - Te - Txc / 2010) - Husqvarna TC 250 2010 Workshop Manual

SETTINGS AND ADJUSTMENTS
KAYABA front fork adjustment (TC - TE - TXC / 2010)
- COMPRESSION (Fig. a)
(TC - TXC: TOP ADJUSTER; TE: LOWER ADJUSTER)
KAYABA: -13 clicks (TC - TXC / 2010);
KAYABA: -10 clicks (TE / 2010);
To reset the standard setting, turn cap nut (A) clockwise to reach the fully closed
position; then, turn it back by the mentioned clicks. In order to obtain a smooth
braking action, turn the adjuster counter clockwise. Vice versa to obtain a harder
braking action.
- REBOUND (Fig. b)
(TC - TXC: LOWER ADJUSTER; TE: TOP ADJUSTER)
KAYABA: -9 clicks (TC - TXC / 2010);
KAYABA: -10 clicks (TE / 2010).
To reset standard setting, turn adjuster (C) clockwise to reach the fully closed
position; then, turn it back by the mentioned clicks. In order to obtain a smooth
braking action, turn the adjuster counter clockwise. Vice versa to obtain a harder
braking action.
- BLEEDING (Fig. a/b) (to carry out after each competition, or monthly).
Set the motorcycle on a central stand, release the fork fully extended and loosen
the bleed valve (D). Once this operation is over, tighten the valve.
NOTE: Never force the adjuster screws beyond the maximum open and closed
positions.
D.28 Part. N. 8000 H1489 (10-2009)