Recording Procedure - Sony DNW-A100 Operation Manual

4-1-3 Recording Procedure

To record, use the following procedure.
1
When the device subject to operations is TAPE,
insert a cassette.
For details, see the section "Inserting a cassette" (page
3-10).
2
Hold down the REC button, and press the PLAY
button.
• When TAPE is the device subject to operations
Recording starts, the servo locks, and the SERVO
indicator lights.
• When MASTER is the device subject to
operations
Recording starts and the TOTAL/REMAIN time
display changes with the progress of recording.
When PROGRAM is the device subject to
operations, you cannot carry out recording by
pressing the REC button and the PLAY button.
3
To stop recording, press the STOP button.
When MASTER is the device subject to
operations, the hard disk stops after automatically
returning to the position where recording was
started.
1
2 3
If you record to the end of the tape
The tape is automatically rewound, and stops.
If you record to the end of the hard disk
The hard disk stops after automatically returning to the
position where recording was started.
Chapter 4 Recording and Playback
4-5