Panasonic KX-TDA100 Programming Manual page 101

To change the status (INS/OUS) of a card (Interactive mode only)
1.
Move the mouse pointer over the card.
A menu will be shown under the mouse pointer.
2.
Select the desired status:
•
Click INS to set the card to in-service status.
•
Click OUS to set the card to out-of-service status.
To install an option card on an OPB3 card
1.
Move the mouse pointer over the card.
A menu will be shown under the mouse pointer.
2.
Select Option Card.
The OPB3 Option Card Setup screen will be displayed. See 3.43 [1-1] Slot—OPB3 Option Card
Setup (KX-TDA100/KX-TDA200/KX-TDA600 only).
Supported Card Types
KX-TDA30
Card
MPR: Main Processing Card
DHLC4: Pre-installed Super Hybrid
Ports
DLC4: 4-Port Digital Extension Card
SLC4: 4-Port Single Line Telephone
Extension Card
BRI1: 1-Port BRI Card
BRI2: 2-Port BRI Card
LCOT2: 2-Port Analogue Trunk Card
LCOT4: 4-Port Analogue Trunk Card
DID3: 3-Port DID Card
DLC8: 8-Port Digital Extension Card
SLC8: 8-Port Single Line Telephone
Extension Card
E1: E-1 Trunk Card
IP-GW4: 4-Channel VoIP Gateway
Card
IP-EXT4: 4-Channel VoIP Extension
Card
SIP-GW4: 4-Channel SIP Trunk
Card
Maximum Supported Slot
Quantity Numbers
1 00
1 01
1
02–04 (Type A
Slots)
3
2
1
05–07 (Type B
1
Slots)
1
1
Card Programming
3.3 [1-1] Slot—Card Property - MPR
3.4 [1-1] Slot—Card Property -
Extension Type
3.13 [1-1] Slot—Card Property - BRI
type/PRI type
3.10 [1-1] Slot—Card Property - LCO
type
3.30 [1-1] Slot—Card Property - DID
type
3.4 [1-1] Slot—Card Property -
Extension Type
3.21 [1-1] Slot—Card Property - E1
type
3.33 [1-1] Slot—Card Property - IP
Gateway
3.36 [1-1] Slot—Card Property - IP
Extension
3.39 [1-1] Slot—Card Property - SIP
Gateway (KX-TDA30 only)
PC Programming Manual
3.1 [1-1] Slot
101