Overview Of The Settings - Siemens RVS41.813 User Manual

Key
Time of day and date
1 E Hours/minutes
2 E Day / month
3 E Year
5 F Start of summertime
6 F End of summertime
Operator section
20 E Language
German ¦ ...
22 F Info
Temporarily ¦ Permanently
26 F Operation lock
Aus ¦ Ein
27 F Programming lock
Aus ¦ Ein
28 I Direct adjustment
Automatic storage ¦ Storage with confirmation
Used as
1)
40 I
Room unit 1 ¦ Room unit 2 ¦ Room unit P ¦ Operator unit 1 ¦
Operator unit 2 ¦ Operator unit P ¦ Service unit
42 I Assignment device 1
Heating circuit 1 ¦ Heating circuits 1 and 2 ¦ Heating circuits
1 and P ¦ All heating circuits
44 I Operation HC2
Commonly with HC1 ¦ Independently
46 I Operation HCP
Commonly with HC1 ¦ Independently
1)
48 I Action occupancy button
None ¦ Heating circuit 1 ¦ Heating circuit 2 ¦ Commonly
54 F Readjustment room sensor
Software version
70 F
Radio links
120 I Binding
No ¦ Yes
121 I Test mode
Aus ¦ Ein
130 I Room unit 1
Missing ¦ Ready ¦ No recept'n ¦ Change batt
131 I Room unit 2
Missing ¦ Ready ¦ No recept'n ¦ Change batt
46/258
Siemens Switzerland Ltd
HVAC Products
5.1.4

Overview of the settings

The table below shows all available settings up to the heating engineer level. Certain
operating lines may be hidden, depending on the unit version used.
E = End-user
I = Commissioning
F = Heating engineer
ST = Can only be set via ACS700 service tool
OL = Operating line
1)
Only QAA75../78..
Only RVS41..
Only RVS61..
User manual RVS61.843, RVS41.813
5 Handling
- 00:00
- 01.01
- 2004
25.03 01.01
25.10 01.01
German
Temporarily
Off.
Off.
Storage with confirmation
Room unit 1
Heating circuit 1
Commonly with HC1
Commonly with HC1
Heating circuit 1
0.0 -3
- 0
No
Off.
-
-
23:59 hh:mm
31.12 dd.MM
2099 yyyy
31.12 dd.MM
31.12 dd.MM
-
-
-
-
-
-
-
-
-
3 °C
99.9 -
-
-
-
-
CE1U2355en_02
28. September 2009