Advertisement
Quick Links
Advertisement
Related Manuals for Buffalo HD-PNFU3
Summary of Contents for Buffalo HD-PNFU3
-
Page 1: User Manual
HD-PNFU3 User Manual www.buffalotech.com 35020043-01 2014-04... -
Page 2: Table Of Contents
Contents LEDs and Connections ............3 Specifications ..............4 Recommended Usage ............5 Warning.....................5 Dismounting the Unit ..............6 Troubleshooting ................7 I can see the DriveStation in Computer (PC) but I cannot access it ..7 I cannot see the DriveStation ..............7 My backup program cannot save files to the DriveStation ....7... -
Page 3: Leds And Connections
LEDs and Connections Power / Access LED Power On: white Accessing: blinking white slowly When Lock and Go Is Enabled Locked : blinking white once every two seconds Initializing : blinking white twice every second USB Connector... -
Page 4: Specifications
Specifications Check Buffalo’s website (www.buffalotech.com) for information about the latest products or compatible models. Interface USB 3.0 Connector USB 3.0 Micro-B Transfer speed 5 Gbps Maximum (USB 3.0) *1 HD-PNFxxxU3-y: 80 x 115 x 14 mm HD-PNFxxxU3-By: External dimensions 80 x 115 x 16 mm... -
Page 5: Recommended Usage
Recommended Usage Warning To avoid damage to data, never do any of the following while data is being accessed: - unplug the cables - turn off your computer - put your computer into standby, hibernate, or sleep mode Never configure this unit as a destination for virtual memory. The maximum size of a file on a FAT32 hard drive is 4 GB. -
Page 6: Dismounting The Unit
This drive may become hot during use. This unit is designed to release heat through its case. The surface of the case may become quite hot in normal use. Even when the unit is off, the case may still be warm from standby current. If the power/access LED does not turn off when you turn off your computer, unplug the USB cable from the drive. -
Page 7: Troubleshooting
Troubleshooting I can see the MiniStation in Computer (PC) but I cannot access it. The drive may require formatting. Try using DiskFormatter2. Consult the manual for DiskFormatter2 for more help. I cannot see the MiniStation. Verify that the power LED is on. If it is not, check the cable! The MiniStation should be connected to your computer by a USB cable.