Controls; Input - Sanyo PJ-Net Organizer POA-PN30 Owner's Manual

Chapter 4 Controlling the Projection Monitor
Initial Setting
Power & Status
PC Adj.
Control
Setting
E-mail Setting
Save
Network
Multi Control
Timer
Information
SNMP Setting

Input

This function is to select the input mode and source mode of the projection monitor.
Click Set button after selecting the input and source mode.
There are some types of input sources depending on the mounted slot boards.
✐ The control page displays valid control items depending on the selected input mode, signal
or functions of the projection monitor you use, therefore, there may be different controls
between the described items and actual control items on the page display. For further infor-
mation , refer to the projection monitor's owner's manual.
✐ When the projection monitor is in standby, only the timer on the setting menu is effective;
others are inactive.
40

Controls

Click Control on the main menu. The setting method differs
depending on the contents of the page. Click on the page
number to change pages and select desired setting items.
✐ Please see the owner's manual of the projection monitor
to have the further information of each control item.
Item Description
Input ..................Selects input mode of the projection monitor. (1 to
5)
Source ...............Selects signal source of the input.
Input 1 : RGB(PC Digital), RGB(AV DHCP)
Input 2 : RGB(Analog)
Input 3 : RGB, Video(Video conference),Y,Pb/Cb,Pr/Cr
Input 4 : Auto ,Video(Video conference),S-video,Y,Pb/
Input 5 : Video(Video conference)
Cb,Pr/Cr