Intercom/Locator; Intercom; Handset Locator; Transferring Calls - Panasonic KX-TG9471C Operating Instructions Manual

Intercom

Intercom calls can be made:
– between the base unit and a handset
– between handsets
Note:
R If you receive an outside call while talking on the
intercom, you hear an interrupt tone (page 29).
– To answer the call with the base unit, place
the corded handset on the cradle, then lift it
again. If the speakerphone is used, press
M N 2 times. You can also answer the call by
pressing MLINE 1N or MLINE 2N after hanging
up the intercom.
– To answer the call with the handset, press
MOFFN, then press M
R When paging unit(s), the paged unit(s) beeps
for 1 minute.
Making an intercom call
Base unit
1
Press MINTERCOMN.
When 2 or more handsets are registered:
– To page a specific handset, enter the
handset number.
– To page all handsets, press 0 or wait for a
few seconds.
R Lift the corded handset if needed.
R To stop paging, press MINTERCOMN.
2
When you finish talking, press MINTERCOMN
or place the corded handset on the cradle.
Handset
1
Press MINTERCOMN.
2
To page the base unit, press 0.
To page another handset, enter its extension
number.
R To stop paging, press MOFFN.
3
When you finish talking, press MOFFN.
Answering an intercom call
Base unit
1
Lift the corded handset or press MINTERCOMN
to answer the page.
2
When you finish talking, place the corded
handset on the cradle or press MINTERCOMN.
1
2
Note for base unit and handset:
R The ringer volume for intercom calls follows the

Handset locator

You can locate a misplaced handset by paging it.
1
2
N.

Transferring calls

Outside calls can be transferred between 2 people.
1
2
3
1
2
3

Intercom/Locator

Handset
Press M N to answer the page.
When you finish talking, press MOFFN.
higher volume level of the 2 lines (page 28).
Base unit: Press MLOCATORN.
R All registered handsets beep for 1 minute.
To stop paging:
Base unit: Press MLOCATORN.
Handset: Press M N, then press MOFFN.
Base unit
During an outside call, press MINTERCOMN.
When 2 or more handsets are registered:
– To page a specific handset, enter the
handset number.
– To page all handsets, press 0 or wait for a
few seconds.
Wait for the paged party to answer.
R If paged party does not answer, press the
flashing MLINE 1N or MLINE 2N to return to
the outside call.
Place the corded handset on the cradle.
R The outside call is being routed to the
handset.
Handset
During an outside call, press MINTERCOMN to
put the call on hold.
To page the base unit, press 0.
To page another handset, enter its extension
number.
Wait for the paged party to answer.
R If the paged party does not answer, press
MLINE 1N or MLINE 2N that is flashing on the
handset to return to the outside call.
43