Connecting To An External Device - Samsung SRN-1000 Quick Manual

connEcting to an ExtErnal dEvicE

Unrated or improper power source may cause damage to the system. Ensure that you use only the rated power source
J
`
before pressing the POWER button.
nEtworking with iP installEr
Use provided IP Installer application program to search devices on the network and manually change the network
settings of the searched device.
Manual network setup
Run <iP installer_vx.xx.exe> to display the device search list.
At the initial startup, both [auto set] and [Manual set] will be grayed out.
1. Select a NVR in the search list.
Both the [auto set] and [Manual set] buttons will be
activated.
2. Click [Manual set].
The Manual Setting dialog appears.
The default values of <iP address>, <subnet Mask>,
<gateway>, <httP Port> and <Port(tcP)> of the NVR
will be displayed.
If found multiple devices assigned with the same IP address, assign different IP addresses to such devices to avoid conflict.
J
`
If conflict has been occurred by sharing the same IP address by multiple devices, recovering may take some time.
`
3. In the <address> pane, provide the necessary information.
• MAC (Ethernet) Address : The MAC (Ethernet) address of
the applicable NVR will be set automatically so you don't
need to input it manually.
You can configure the static IP settings only if the DHCP checkbox
M
`
is unchecked.
eSATA HDD
Alarm
Sensors
Power
English _3