Feeder
Dust and graphite powder may adhere to the roller inside the feeder and cause smudges to appear on printouts. To clean the feeder,
perform the following procedure. To clean the feeder, you need ten sheets of plain A4 or Letter size paper. Set them in the feeder before
performing the following procedure.
1
Press
.
2
Use
/
to select <Adjustment/Maintenance>, and press
3
Select <Clean Feeder>, and press
4
Press
.
Cleaning starts. When the <Finished.> message is displayed approximately 1 minute later, press
screen.
Downloaded from ManualsPrinter.com Manuals
Placing Documents
.
.
0ALJ-0E3
to return to the main