1. Precautions 1. Precautions 1-1. Safety Precautions Follow these safety, servicing and ESD precautions to prevent damage and to protect against potential hazards such as electrical shock. 1-1-1. Warnings For continued safety, do not attempt to modify the circuit board. Disconnect the AC power and DC power jack before servicing.
1. Precautions 1-2. Servicing Precautions WARNING: An electrolytic capacitor installed with the wrong polarity might explode. Caution: Before servicing units covered by this service manual, read and follow the Safety Precautions section of this manual. Note: If unforeseen circumstances create conflict between the following servicing precautions and any of the safety precautions, always follow the safety precautions.
1. Precautions 1-4. Installation Precautions For safety reasons, more than a people are required for carrying the product. Keep the power cord away from any heat emitting devices, as a melted covering may cause fire or electric shock. Do not place the product in areas with poor ventilation such as a bookshelf or closet. The increased internal temperature may cause fire.
2-2. Detail Factory Option If you replace the main board with new one, please change the factory option as well. ※ The options you must change are “Type”. LD400 Model Name LA19D400E1 LA22D400E1R LA26D400E1 LA32D400E1 Vendor Panel CODE BN07-00941A...
5. Wiring Diagram 5-3. Connector Functions Connector Functions Supply main power and dimming signal from IP board to Main Board. Main IP (14p) Main T-CON (30p LVDS) The LVDS signal transfered from Main Board to Panel . IP ...