Table of Contents
Advertisement
Supplemental Information
Regulatory
The requirements for any country may evolve. Linksys recommends that
end-user check with the local authorities for the latest status of their
national regulations for both the 2.4 GHz and the 5.0 GHz.
Overview of Regulatory Requirements for Wireless LANs
I
Max. Power Level
Indoor&
Frequency Band (MHz)
EIRP (mW)
Indoor Only
Outdoor
2400-2483.5
100
X
5150-5250
200
X
5250-5350t
200
X
5470-5725t
1000
X
tDynamic Frequency Selection (DFS) and Transmit Power Control (TCP) are
required in the frequency ranges of
5250-5350 MHz
and
5470-5725 MHz.
Dynamic Frequency Selection (DFS) and Transmit Power Control (TPC)
are required for operation in the 5.0 GHz band.
DFS: Dynamic Frequency Selection. This feature is required by the
national regulations to avoid interference with the Radio Location
Services (radars) when operating in the 5.250-5.350 GHz & 5.470-5.725
GHz bands.
TPC: Transmit Power Control. For operation in the 5.250-5.350 GHz band
& 5.470-5.725 GHz band, the maximum power level is 3 dB or more
below the applicable limit. As such, TPC is not required.
This Wireless-N Touchscreen Remote Control model DMRW1 000 does
not meet the DFS requirements as defined in ETSI/EN 301-893. The
5250-5350 MHz & 5470-5725 MHz bands are disabled in order to comply
with the ETSI/EN 301-893. Operating this equipment in these bands is
not allowed.
Wireless-N Touchscreen Remote
13
Advertisement
Table of Contents
