Step 2: Charge The Battery; Step 3: Establish Basic Settings On The Device - GE MapSight User Manual

Step 2: Charge the battery

1. Ensure the appropriate country adaptor is fitted to the
power pack
2. Mount the plug onto the wall charger (if it is not
already assembled).
3. Plug the wall charger into an outlet.
4. Plug the other end of the wall charger into the DC jack
on your MapSight. The device turns on after a few
seconds, and a flashing red light signals the device is
charging.
5. Charging MapSight for 4 hours charges it to around
95%.
6. Let the device charge for 6 hours to get a full charge.
Note: If your MapSight suspends and the flashing red LED turns off, the device keeps
charging.
Charging temperatures: Only charge your battery pack in temperatures between 32°F and
104°F (0°C and 40°C). For best results, charge the battery pack at room temperature (68°F
or 20°C).

Step 3: Establish basic settings on the device

Using the stylus, follow the instructions on the screen to calibrate the device and establish
basic settings.
We recommend creating a name for your MapSight so external devices like desktop computers
or devices that use Bluetooth® technology can differentiate your MapSight from other devices
more easily.
To create a name, follow these steps:
Tap >
1. Start Settings.
From the tab, tap
2. System
3. Select the
Device ID
screen.
4. Type in a device name. We recommend using
" "
SN (serial number) and the device serial
number, which can be found by tapping
> and choosing
Settings System
An example of a device name appears below.
MapSight U ser M anual
MS-101-14-12-34.0
About
tab at the bottom of the
Start
System Configuration.
Page 1 02
>
www.gemapsight.com/support