Connect With Wps - NETGEAR WN2000RPT Installation Manual

Connect with WPS

Wi-Fi Protected Setup (WPS) lets you easily join a secure WiFi
network without typing the network name and password.
WPS does not support WEP network security. If you are using WEP
security, follow the instructions in
Smart Setup on page 9.
 To connect with WPS:
1. Press the WPS button
2. Within two minutes, press the WPS button on your router or access
point.
The Link Rate LED
extender is connected to your existing WiFi network.
Note: If the Link Rate LED does not light, try again. If it still does
not light, see
page 9.
on your extender lights, and the
Connect with NETGEAR genie Smart Setup
Connect with NETGEAR genie
on the extender.
7
on