Honda S2000 2007 Owner's Manual page 182

Changing a Flat Tire
SPARE TIRE COVER
Remove the three clips holding
4.
the spare tire cover by pulling the
rings straight back. Remove the
spare tire cover.
176
WHEEL NUT WRENCH
CLIPS
Unscrew the wing bolt, and take
5.
the spare tire out of the spare tire
shelf.
6. Loosen each wheel nut 1/2 turn
with the wheel nut wrench.
JACKING
POINT
Place the jack under the jacking
7.
point nearest the tire you need to
change. Turn the end bracket
clockwise until the top of the jack
contacts the jacking point. Make
sure the center of the jacking
point tab is resting in the jack
notch.