Table of Contents
Advertisement
Changing menu options
1
Press MENU, then select SET UP MENU.
2
Press M/m to select the option to change, then
press </, to change the setting.
The SET UP MENU has 2 pages. To select
page 2, press m repeatedly until page 2
appears. To select page 1 press M repeatedly
until page 1 appears.
3
Press OK to return to the original screen.
Menu choices
Initial settings are indicated in bold print.
Menu option
Set this option to
AUDIO MIX
ON to listen to the hi-fi and normal audio tracks at the same
time. The AUDIO MONITOR button will not function.
OFF to listen to hi-fi and normal audio tracks separately. Select
the sound using the AUDIO MONITOR button.
HIFI AUDIO
STD to record standard sound on the hi-fi audio track.
NICAM to record NICAM broadcasts on the hi-fi audio track.
For details, see page 61.
ON to switch on the APC (Adaptive Picture Control) function
APC
and improve picture quality. OFF to switch off APC.
PAL/MESECAM
AUTO to have the VCR automatically select the colour system
for recording and playback. If the picture has no colour or
unusual colours, set to PAL or MESECAM according to your
local colour system.
NTSC PB
ON PAL TV to play back an NTSC-recorded tape on a PAL TV.
4.43 or 3.58 according to the colour system of your NTSC TV.
For details, see page 35.
TAPE LENGTH
AUTO to have the VCR automatically select the tape length.
For E240, E260 or E300 tapes, set it according to the tape type
that you are using to display the remaining time correctly.
Note
• You may not be able to display the remaining time correctly for an NTSC
tape using the TAPE LENGTH menu.
Operation
(when recording on this VCR)
Before you start editing
• Turn on your TV and set it to the
video channel.
• Press INPUT SELECT or PROG +/–
to display "L1" or "L2" in the display
window.
• Press REC SPEED to select the tape
speed (SP or LP for the PAL system,
and SP or EP for the NTSC system).
1
Insert a source tape with its safety tab removed into the other
(playback) VCR. Search for the point to start playback and set it to
playback pause.
2
Insert a tape with its safety tab in place into this (recording) VCR.
Search for the point to start recording and press X PAUSE.
3
Press z REC on this VCR and set it to recording pause.
4
To start editing, press the X PAUSE buttons on both VCRs at the same
time.
To stop editing
Press the x STOP buttons on both VCRs.
Tips
• To edit more precisely, press the X PAUSE buttons on the VCRs to release pause.
• To cut out unwanted scenes while editing, press X PAUSE on this VCR when an
unwanted scene begins. When it ends, press X PAUSE again to resume recording.
Note
• If you start recording following the procedure above, the VCR will not start
recording with the APC function. To record a tape with the APC function, press
z REC again during recording pause in step 3 so that the VCR analyses the tape.
Then when you start recording in step 4, press X PAUSE after the APC indicator
stops flashing. If you press X PAUSE before the APC indicator stops flashing, the
APC function is cancelled.
SET UP MENU
1/2
AUDIO MIX
ON
•
OFF
HIFI AUDIO
STD
•
NICAM
APC
•
ON
OFF
PAL / MESECAM
•
AUTO
PAL
MESECAM
NTSC PB
•
ON PAL TV
4 . 43
3 . 58
SELECT
: [
]
SET
: [
]
SET UP MENU
2/2
TAPE LENGTH
E240
E260
E300
•
AUTO
SELECT
: [
]
SET
: [
]
65
Additional Operations
X PAUSE
z REC
67
Additional Operations
1-16
Connecting to a VCR or stereo system
How to connect to record on this VCR
This VCR (Recorder)
LINE-2 IN
VMC-810HG audio/video cable (not supplied)
: Signal flow
How to connect to a stereo system
Connect LINE-2 IN AUDIO on this VCR to the audio output jacks on the
stereo system, using the RK-C510HG audio cable (not supplied).
Tips
• If the other VCR is a monaural type and connected to this VCR's LINE-2 IN jacks,
connect the audio plug to the AUDIO L (white) jack. The sound is recorded on both
right and left channels. When connecting to the AUDIO R (red) jack, the sound is
recorded only on the right channel.
• You can also use the LINE-1 IN jacks instead. If the other VCR is a monaural type,
the sound is recorded only on the channel whose jack is connected to the audio
plug. To record on both right and left channels, connect the audio plugs to the
AUDIO R/L jacks using a VMC-910HG audio/video cable (not supplied).
Notes
• Make sure you connect the plugs to the jacks of the same colour.
• If you connect this VCR to both the LINE IN and LINE OUT jacks of the other VCR,
select the input correctly to prevent a humming noise.
66
Additional Operations
Sapphire tape cleaner
The unit incorporates a sapphire tape cleaner which cleans a video tape when it is
loaded. This cleaner can prevent the video heads from contamination by removing
dust or mold from a tape with its sapphire edge.
Head Condition Sensor
The Head Condition Sensor checks the condition of the video heads. If the heads are
dirty, a message will instruct you to insert a video head cleaning cassette.
The VCR may temporarily switch to a different head and resume playback. To switch
the heads, press H PLAY while the "PUSH [PLAY] TO RESUME TEMPORARILY"
message appears on the screen. Although playback will resume, the sound will be
monaural. You may have to manually adjust the tracking to get a better picture (see
"Adjusting the picture" on page 63). When playback is finished, be sure to clean the
heads with a video head cleaning cassette.
Be sure to use the Sony T-25CLD, T-25CLW or E-25CLDR video head cleaning
cassette. If these cleaning cassettes are not available in your area, have the heads
cleaned at your nearest Sony service facility (a standard service charge will be
required).
TV
Other VCR (Player)
LINE OUT
71
Additional Information
Hide quick links:
Advertisement
Table of Contents
