Wrong Paper Size - Brother MFC-J825DW Basic User's Manual

Error Message
Unusable Device
Disconnect device
from front connect
or & turn machine
off & then on
Unusable Device
Please Disconnect
USB Device.
Wrong Ink Color

Wrong Paper Size

Cause
A broken device has been connected
to the USB direct interface.
A USB device or USB Flash memory
drive that is not supported has been
connected to the USB direct interface.
For more information, visit us at
http://solutions.brother.com/.
A color ink cartridge has been installed
in the Black ink cartridge position.
The Paper Size setting does not
match the size of paper in the tray. Or,
you did not set the paper guides in the
tray to the indicators for the paper size
you are using.
Troubleshooting
Action
Unplug the device from the USB direct
interface, then press
turn the machine off and then on
again.
Unplug the device from the USB direct
interface. Turn the machine off and
then on again.
Check which ink cartridges are not
matched by color to their ink cartridge
positions and move them to their
correct positions.
1 Check that the paper size you
choose matches the size of paper
in the tray.
2 Make sure you loaded the paper in
a Portrait position, by setting the
paper guides at the indicators for
your paper size.
3 After you have checked the paper
size and the paper position, press
Mono Start or Color Start.
On/Off to
B
81