Features - HP Server rx2600 Installation Manual

Feature
Processor(s)
Cache Memory (integrated
in processor package)
Internal Processor Clock
Speed
Chipset
Firmware
Operating System
Main Memory
Mass Storage
SCSI Controller
IDE Controller
Graphics Controllers
Chapter 1

Features

The following table provides an overview of the zx6000 and rx2600
system features:
Systems can be operated with one or two Intel
•
Level 0: 16KB
•
Level 1: 256KB
•
Level 2: 3MB (1.5 MB for 900MHz processor)
900MHz and 1GHz
HP scalable processor, including a Processor Dependent Hardware
interface, AGP/PCI X host controller and Memory Controller
8Mb flash EEPROM, write-protected by BMC
HP-UX and Linux Operating Systems
Twelve DIMM sockets that support 256MB, 512MB and 1GB DDR
SDRAM memory modules.
The order in which you install the memory modules is important. For
information on installing memory, see the zx6000/rx2600 Operation &
Maintenance Guide (at www.hp.com/go/bizsupport). You can install a
minimum of 512MB (1 Gb for server configuration) of memory and a
maximum of 12GB.
Four shelves, supporting:
•
One front-access, slimline, optical drive.
•
Three fast access internal 3 1/2-inch hard disk drives (1-inch
height).
Two channel Ultra 160 SCSI PCI bus.
Includes an integrated Ultra ATA-100 capable controller that supports
one IDE device.
•
NVIDIA Quadro2 EX, NVIDIA Quadro4 900XGL
or
•
ATI Radeon 7000, ATI FireGL 8800 and ATI FireGL4
Setting Up and Using Your System
Description
®
Itanium
System Description
®
2 processors
15