Teletext Language Setting; Displaying Subpages - Sharp Aquos LC-32D33X Operation Manual

Teletext function

Teletext language setting

If Teletext information does not display correctly,
perform the procedure below.
Select from among 4 kinds of language tables: West
Europe, East Europe, Greek/Turkish, Cyrillic.
Each table is compatible with the Teletext languages
listed below.
Press MENU and the MENU screen displays.
1
Press c / d to select "Setup".
2
Press a / b to select "Text Language", and
3
then press ENTER.
Press a / b to select receivable teletext
4
broadcasting language in your country, and
then press ENTER.
[ Setup ... Text Language ]
MENU
Teletext language settings
• West Europe — English, French, Scandinavian,
Czech, German, Spanish, Italian
• East Europe — Polish, French, Scandinavian,
Czech, German, Slovenian/Croatian, Italian,
Rumanian
• Greek/Turkish — English, French, Scandinavian,
Turkish, German, Spanish, Italian, Greek
• Cyrillic — English, Russian, Estonian, Czech,
German, Spanish, Ukrainian, Lettish
NOTE
• Teletext can display only when it is sent by a network. Not
used to convert between languages.
64
32D33X_en_i.indd 64 32D33X_en_i.indd 64
West Europe
East Europe
Greek/Turkish
Cyrillic

Displaying Subpages

You can display subpages as they are transmitted.
Press m to display Teletext.
1
Press 1 to display the subpage as shown
2
below.
Subpage screen
– +
Select the desired subpage by using CH r / s ,
3
Red or Green.
• 0 — 9 directly selects the desired subpage.
Press 1 to exit the subpage screen.
4
2008-2-25 16:10:41 2008-2-25 16:10:41