Test Run Function - Panasonic S-36PU1E5A Technical Data & Service Manual

7-8. Test Run Function

Operates the unit with the thermostat forced ON.
<Procedure of CZ-RTC2>
1 Press and hold the
longer.
2 "TEST" appears on the remote controller LCD
display (Fig. 7-7).
3 Start operation.
4 Press the button to return to normal remote
controller display.
<Procedure of CZ-RTC3>
1 Keep pressing the
buttons simultaneously for 4 or more seconds.
The "Maintenance func" screen appears on the
LCD display.
Maintenance func
1. Outdoor unit error data
2. Service contact
3. RC setting mode
4.Test run
Sel. Page [
2 Press the or
menu.
If you wish to see the next screen instantly, press
the or button.
Select "4. Test run" on the LCD display and press
the button.
Maintenance func
1. Outdoor unit error data
2. Service contact
3. RC setting mode
4.Test run
Sel. Page [
Change the display from OFF to ON by pressing
the or button. Then press the
button.
Test run
Test run
Change [
button for 4 seconds or
, and
20:30 (THU)
] Confirm
button to see each
20:30 (THU)
] Confirm
20:30 (THU)
ON
] Confirm
[ ]
START
3 Press the
on the LCD display.
TEST
[ ] START
4 Press the
Test run setting mode screen appears on the LCD
display.
TEST
MODE
COOL
7-19
CZ-RTC2
Fig. 7-7
20:30 (THU)
CZ-RTC3
Fig. 7-8
button. "TEST" will be displayed
20:30 (THU)
button. Test run will be started.
20:30 (THU)
7