Storing Custom Settings; (Recall Memory) - Yamaha LC3 Music Lab Operation Manual

It's possible to group students from more than one bank—students 1 and 3 with student 10 and 11,
for example. Simply press and hold the GROUP A button, select BANK 1, tap student 1 then 3,
next select BANK 2 by pressing the BANK button and tap student number 10 (button 2) and 11
(button 3). Release the GROUP button A and it will begin to flash indicating the group is active
and you are working with them.
Storing Custom Settings (RECALL MEMORY 1-6)
It's possible to save your GROUP A/B/C/D configurations as custom RECALL MEMORIES. Your
control unit actually has six buttons––each capable of holding a GROUP A/B/C/D configuration.
Remember that RECALL MEMORY 7 and RECALL MEMORY 8 are pre-set to turn all student
buttons on (into a MEGAGROUP) and all student buttons off (students go back to the virtual
practice rooms). RECALL MEMORIES 1-6 are yours to customize.
If you had six different classes, for example, you could have completely different GROUP A/B/C/D
configurations for each class at the touch of a button.
To store your custom group settings in your control unit, first tap the STORE button, then tap the
desired student button number 1-6.
9 17 10 18 11 19 12 20 13 21 14 22 15 23 16 24
25 33 41 26 34 42 27 35 43 28 36 44 29 37 45 30 38 46 31 39 47 32 40 48
Tap one numbered button (1-6) to assign your RECALL MEMORY.
13