Rules; Show A Range Of Rules - D-Link DFL-260E Reference Manual

2.2.56. rules

Options
-all
-flushl3cache
-lookup=<ip address>
-nonhost
-num=<n>
-switched
-tables
-verbose
<table name>
2.2.56. rules
Show rules lists.
Description
Shows the content of the various types of rules, i.e. main ruleset, pipe ruleset, etc.
Example 2.11. Show a range of rules
rules -verbose 1-5 7-9
Usage
rules [-type={IP | ROUTING | PIPE | IDP | THRESHOLD | IGMP}]
[-verbose] [-schedule] [<rules>]...
Options
-schedule
-type={IP | ROUTING | PIPE |
IDP | THRESHOLD | IGMP}
-verbose
<rules>
Also show routes for interface addresses.
Flush Layer 3 Cache.
Lookup the route for the given IP address.
Do not show single-host routes.
Limit display to <n> entries. (Default: 20)
Only show switched routes and L3C entries.
Display list of named (PBR) routing tables.
Verbose.
Name of routing table.
Filter out rules that are not currently allowed by selected
schedules.
Type of rules to display. (Default: IP)
Verbose: show all parameters of the rules.
Range of rules to display. (default: all rules).
63
Chapter 2. Command Reference