Table of Contents
Advertisement
10 Configure the alarm settings [Alarm]
[Post alarm]
•
Transmission interval
Select the transmission interval for the alarm image transmission to the FTP server from the following.
NTSC: 0.1fps/ 0.2fps/ 0.33fps/ 0.5fps/ 1fps
PAL: 0.08fps/ 0.17fps/ 0.28fps/ 0.42fps/ 1fps
•
Default: 1fps
•
Number of images
Select the number of images to be transmitted from the following.
1pic/ 2pics/ 3pics/ 4pics/ 5pics/ 6pics/ 7pics/ 8pics/ 9pics/ 10pics/ 20pics/ 30pics/ 50pics/ 100pics/ 200pics/
300pics/ 500pics/ 1000pics/ 2000pics/ 3000pics
•
Default: 100pics
•
Recording duration
Approximate time to be taken to save the set "Number of images" with the set "Transmission interval" will
be displayed.
[Image capture size]
Select the capture size of images to be transmitted to the FTP server or of an image to be attached to the
alarm E-mail.
Picture (Camera) mode VGA [4:3]
Picture (Camera) mode VGA [16:9]
•
Default: VGA
[Image compression rate upon alarm detection]
Select "On" or "Off" to determine whether or not to change the image quality of "Quality1" (®page 33) upon
alarm detection.
•
On: Images will be transmitted with the image quality selected for "Image quality upon alarm detection".
•
Off: Does not change the image quality upon alarm detection.
•
Default: Off
[Image quality upon alarm detection]
Image quality can be changed upon an alarm occurrence. Select the image quality from the following.
0 Super fine/ 1 Fine/ 2/ 3/ 4/ 5 Normal/ 6/ 7/ 8/ 9 Low
•
Default: 5 Normal
10.3 Configure the VMD settings [VMD area]
Click the [VMD area] tab on the "Alarm" page. (®page 21, page 23)
The VMD areas can be set on this page.
Up to 4 areas can be set. When motion is detected in the set area, it will be regarded as an alarm.
IMPORTANT
•
The alarm occurrence indication button (®page 9) will be displayed when motion is detected by the
VMD function.
•
The alarm occurrence indication button will be displayed when receiving a command alarm or video
loss alarm.
•
Depending on the network environment, notification may be delayed even when "Real time" is selected
for "Alarm status update mode" on the [Basic] tab of the "Basic" page (®page 27).
48
Operating Instructions
QVGA/VGA
320x180/640x360
Advertisement
Table of Contents
