Panasonic SC-HT545W Operating Instructions Manual page 31

QUICK SETUP enables successive settings of the items in the shaded area.
∫ "Video" menu
TV Aspect
Choose the setting to suit
your television and
preference.
TV Type
Select to suit the type of
television.
Time Delay
When connected with a
Plasma display, adjust if you
notice the audio is out of sync
with the video.
Video Out (AV/Component)
Choose the video signal
format to be output from the
SCART (AV) and Component
terminal.
Still Mode
Specify the type of picture
shown when paused.
NTSC Disc Output
Choose PAL 60 or NTSC
output when playing NTSC
discs (➜ page 18, Video
systems).
Picture/Video Output
Change the video signal
format to be output for JPEG,
MPEG4 and DivX video if
picture output is not smooth
during playback.
§4
Refer to "Frame still and field still" (➜ page 44, Glossary).
≥ 4:3 Pan&Scan : Regular aspect television (4:3)
The sides of the widescreen picture are cut off so it fills the
screen (unless prohibited by the disc).
≥ 4:3 Letterbox: Regular aspect television (4:3)
Widescreen picture is shown in the letterbox style.
≥ 16:9: Widescreen television (16:9)
≥ Standard (Direct View TV)
≥ LCD TV/Projector
≥ 0ms ≥ 20ms
≥ Video/YPbPr : Video and YPbPr
≥ RGB/No Output: RGB only
≥ Automatic
≥ Field
§4
: The picture is not blurred, but picture quality is lower.
≥ Frame
§4
: Overall quality is high, but the picture may appear blurred.
≥ PAL60 : When connected to a PAL television.
≥ NTSC: When connected to an NTSC television.
≥ Automatic
≥ NTSC/PAL60: Output will depend on "NTSC Disc Output" setting (➜ above).
≥ CRT Projector
≥ Projection TV
≥ 40ms ≥ 60ms
≥ S-Video/YPbPr: S-Video and YPbPr
≥ PAL
≥ Plasma TV
≥ 80ms ≥ 100ms
(Continued on next page)
31