HIKVISION DS-2CD2012-I Quick Operation Manual page 14

Network Bullet Camera Q uick Operation Guide
· · · ·
right side, or click to show the network parameter
panel.
Modify device information
Steps:
1). Left click to select a device to be modified in the device list
as shown in Figure 3-3. The network parameters of the
device will be displayed in the Modify Network Parameters
panel on the right side as shown in Figure 3-4.
2). Edit the modifiable network parameters, e.g. IP address
and port number.
Enter the password of the admin account of the device in
the Password field and click
changes.
Figure 3-3 Select a device
13
to save the