Navigation Setup - Kenwood DNX892 Instruction Manual

Navigation Setup

You can set navigation parameters.
1
Press the
volume knob.
Popup menu appears.
2
Touch [SETUP].
SETUP Menu screen appears.
3
Touch [Navigation].
Navigation SETUP screen appears.
4
Set each item as follows.
NAV Interrupt Speaker
Selects speakers used for voice guidance of the
navigation system.
Front L: Uses the front left side speaker for
voice guidance.
Front R: Uses the front right side speaker for
voice guidance.
Front All (Default): Uses both front speakers
for voice guidance.
NAV Voice Volume
Adjusts the volume for voice guidance of the
navigation system. Default is "20".
<MENU> button/
NAV Mute
Mutes the volume of rear speakers during
voice guidance of the navigation system.
Default is "ON".
Return to the Top page
Setting Up
101