Advertisement
Please note that as the handles on the Acclaim range can reach high temperatures depending on the position
or orientation of the luminaire, and that gloves should always be worn when focusing these luminaires.
ACCESSORIES
♦ Suspension hook clamp (Order Code: 20HC)
♦ Lens safety mesh (Order Code: 15ACSM)
♦ Colour frame – the luminaire is supplied with a 186mm x 190mm colour frame. Additional colour frames are
available (Order Code: 20CCFMF).
♦ Barndoor (Order Code: 20BDMF)
♦ Safety chain wire (Order Code: RASWFR)
EARTH TEST POINT
There is an earth test point located on the rear housing of the Acclaim Fresnel or PC luminaire. The earth test
point is the silver machine screw located on the right side of the rear housing, and is indicated by an earth
symbol. To test the earth of your Acclaim, place the test probe on the silver machine screw, and perform the
earth test.
CLEANING
Open the down-swinging door, and clean the lens and/or reflector with a soft lint-free cloth.
This is the only maintenance task, which can be safely carried out by non-approved
personnel. Refer below – Safety & Maintenance note.
SAFETY & MAINTENANCE
Selecon has manufactured this luminaire in accordance with recognised best practices to recommended
international safety standards. It is your responsibility to maintain this luminaire in good and safe working
condition.
Repairs should only be carried out by suitably qualified persons. Do not operate the luminaire with cracked
lens, damaged cables etc. Consult your Selecon distributor for assistance. Only replace damaged parts with
authorised Selecon spares.
N.B. Luminaire Cable – your Selecon luminaire is fitted with a special heat-resistant, flexible cable, replace with
genuine Selecon spare part cable kit only – refer to your Selecon distributor. (Replacement cables are supplied
complete with necessary terminal connectors).
Cable Conductor colour codes:
Brown
-Phase, Live
Blue
-Neutral, Return
Green/ Yellow -Earth
PHYSICAL DATA (Fresnel) - Metric
Weight:
3.3kg
Packed: 3.7kg
Carton Size:
420 x 225 x 175
Cubic: 0.016
Colour Frame Size: 125mm x 125mm
Luminaire with integrated safety bond supplied with:
1 x colour frame, 1 x M12 nut & bolt set and instruction leaflet.
© June 2009 All Rights Reserved
Advertisement
