Eco-Throttle Switch; Parallel Operation Outlets - Honda EU1000i Owner's Manual

Hide thumbs Also See for EU1000i:

Table of Contents

Eco-Throttle Switch

The Eco-Throttle

loads are turned off or disconnected. When appliances are turned on

or reconnected, the engine returns to the proper speed to power the

electrical load.

If high electrical loads are connected simultaneously, turn the

Eco-Throttle switch to the OFF position to reduce voltage changes.

ON:

Recommended to minimize fuel consumption and further

reduce noise levels when less than a full load is applied to the

generator.

OFF:

The Eco-Throttle system does not operate.

When using the DC output, turn the Eco-Throttle switch to the

OFF position.

These outlets are used for connecting two EU1000i generators for

parallel operation (see page

cables (optional equipment) is required for parallel operation. This

cable can be purchased from an authorized Honda generator dealer.

system automatically reduces engine speed when

). A Honda approved parallel operation

PARALLEL OPERATION OUTLETS

CONTROLS & FEATURES

ECO-THROTTLE SWITCH

Table of Contents