Fcc Notice - NETGEAR Sprint 341U Important Information Manual

Specific Absorption Rates (SAR) for Wireless
Devices
The SAR value corresponds to the relative amount
of RF energy absorbed into the body of a user of a
wireless device.
The SAR value of a device is the result of an extensive
testing, measuring and calculation process. It does
not represent how much RF the device emits. All
device models are tested at their highest value in strict
laboratory settings. But when in operation, the SAR
of a device can be substantially less than the level
reported to the FCC. This is because of a variety of
factors including its proximity to a base station antenna,
device design and other factors. What is important
to remember is that each device meets strict federal
guidelines. Variations in SARs do not represent a
variation in safety.
All devices must meet the federal standard, which
incorporates a substantial margin of safety. As stated
above, variations in SAR values between different
model devices do not mean variations in safety. SAR
6
values at or below the federal standard of 1.6 W/kg are
considered safe for use by the public.
The highest reported SAR values of the NETGEAR
341U USB Modem are:
Body: 1.34 W/kg (1g)
FCC Radio Frequency Emission
This device meets the FCC Radio Frequency Emission
Guidelines.
FCC ID number: PY3AC341U
More information on the device's SAR can be found
from the following FCC website:
http://fcc.gov/oet/ea/fccid .

FCC Notice

This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) this device may not cause harmful interference,
and (2) this device must accept any interference
received, including interference that may cause
undesired operation.
Important Safety Information