Reset Functions; How To Reset The Machine - Brother DCP-9020CDW Basic User's Manual

Reset functions

The following reset functions are available:
1 Network
You can reset the internal print server
back to its default factory settings such as
the password and IP address information.
2 All Settings
You can reset all the machine's settings
back to the factory default.
Brother strongly recommends you
perform this operation when you dispose
of the machine.
NOTE
Unplug the interface cable before you
choose Network or All Settings.

How to reset the machine

B
a
Press
b
Press All Settings.
c
Swipe up or down, or press a or b to
display Initial Setup.
d
Press Initial Setup.
e
Press Reset.
f
Press Network or All Settings to
choose the reset function you want.
g
Do one of the following;

To reset the settings, press Yes and
go to step h.

To exit without making changes,
press No.
h
You will be asked to reboot the machine.
Do one of the following;

To reboot the machine press Yes for
2 seconds. The machine will begin
the reboot.

To exit without rebooting the
machine, press No.
NOTE
• If you do not reboot your machine, the
reset will not complete and your settings
will remain unchanged.
• You can also reset the Network settings
by pressing
Network, Network Reset.
Troubleshooting
.
, All Settings,
B
B
119