Measuring - Epson Runsense SF-810 User Manual

SF-810 User Manual
Setting Measurements Using the PC Application (Run Connect)
F
Set the distance or time to divide the
lap, and then click OK.
G
When registering multiple entries or
editing them, click the button and
perform operations.
When you have finished choosing
your settings, click OK.
Note:
When Standard is selected, your setting will be
repeated. Deselect Standard to customise your
settings.
H
Select the settings you want to write to
the device, and then click Write to
Wrist Device.
I
Click Yes.
Settings are written to the device.
J
Click Close.

Measuring

See the following pages to select the AT Lap settings, and
then measure.
"Recording Laps Automatically (AT Lap
U
Function)" on page 56
"Measuring" on page 41
U
83