Honda 2006 Accord Coupe Owner's Manual page 250

Main Menu Table of Contents
Lights
Low Beam Headlight
HOLDING CLIPS
1. To change the passenger's side
bulb, start the engine, turn the
steering wheel all the way to the
left, and turn off the engine. To
change the driver's side bulb, turn
the steering wheel to the right.
2. Use a flat-tipped screwdriver to
remove the two holding clips from
the inner fender.
248
3. Pull the inner fender cover away
from the fender and bumper.
AIR INTAKE DUCT
EX-V6 with M/T
4. On EX-V6 model with manual
transmission
To change the low beam headlight
bulb on the driver's side, remove
the air intake duct. You can reach
the air intake duct from the back
side of the inner fender.
5. Remove the electrical connector
from the bulb by squeezing the
connector to unlock the tab, then
slide the connector off the bulb.
6. Remove the bulb by turning it
approximately one-quarter turn
counterclockwise.