System Loader Messages - HP 9020 CE Handbook

5-22
9020 Diagnostics
System Loader Messages
Trailer
NNNNN
indicates Rev. A loader select codes.
Example:
Where:
NNNNN
is 21
21 -;- 8
=
2 Remainder 5
/
~
~----~----~ ~~~~
2 - 1
=
lOP number Slot number
Trailer
SELECT CODE NN
indicates Rev. B loader select codes; 0 through 7
=
1st lOP, 8 through
15 = 2nd lOP, and 16 through 24 = 3rd lOP.
Messages
Lo a de
r
XXX -
Informational message identifying the revision of the system loader. This message is
usually followed by a single line message identifying the operating system the computer is attemp-
ting to load.
Ie
5
tin
~
Me
hi 0
r
y • • • -
Informational message that follows the "Loader XXX" message indicating
that the loader is performing memory tests and configuring memory. This can take up to 15
seconds.
L
001\
i
n
~
for
S
Y 5
t
e
hi ••• -
Informational message that follows the "Testing Memory ... " message
indicating that the loader is searching for an operating system.
PIe as
e
hi 011
n t n ext
v
0 111 hi
e. -
Informational message. The loader is ready to load another portion
of the operating system. Mount the volume containing an unloaded portion of the operating
system. Volumes may be mounted in any order without affecting the loading process.
SYSTEM NOT FOUND; WILL RETRY: XXX
SYSTEM NOT FOUND; WILL RETRY IN XXX
- Unable to find an operating system on any mass storage device. The loader will attempt to find an
operating system again in XXX seconds. Possible causes: mass storage device not powered up, no
media in mass storage device, wrong disc in disc drive, computer or mass storage device hardware
failure, media failure, incompatible loader/system revision numbers, etc.
BAD SYSTEM FILE: NNNNN
BAD SYSTEM FILE: SELECT CODE NN
- Operating system loaded. However, an error has been detected in the operating system code
during loading. Possible causes: corrupt system, media failure, mass storage hardware failure, or
computer hardware failure.
INSUFFICIENT USABLE MEMORY: XXXX
NOT ENOUGH USABLE MEMORY; TOTAL IS XXXX
- The amount of usable memory is too small to load the operating system. The total amount of
good memory is "XXXX" bytes. However, the amount of memory available for the Rev. A
operating system is "XXXX" minus 32K bytes. The amount of memory available for the Rev. B
operating system is "XXXX" minus 98 304 bytes. Possible causes: corrupt system or hardware
(memory) failure.