Specifications - Kenwood KDC-X599 Instruction Manual

TROUBLESHOOTING
Symptom Remedy
• Search from the Bluetooth device again.
No Bluetooth device is
• Reset the unit. ( 3)
detected.
• Make sure you have entered the same PIN code to both the unit and
Bluetooth pairing cannot
be made.
• Delete pairing information from both the unit and the Bluetooth
• Adjust the microphone unit's position. ( 13)
Echo or noise is heard during
• Check the [ECHO CANCEL] setting. ( 14)
a phone conversation.
• Reduce the distance between the unit and the Bluetooth device.
Phone sound quality is
• Move the car to a place where you can get a better signal reception.
poor.
• Use voice calling method in a more quiet environment.
Voice calling method is not
• Reduce the distance from the microphone when you speak the name.
successful.
• Make sure the same voice as the registered voice tag is used.
• Reduce the distance between the unit and the Bluetooth audio player.
Sound is being interrupted
• Turn off, then turn on the unit and try to connect again.
or skipped during playback
• Other Bluetooth devices might be trying to connect to the unit.
of a Bluetooth audio player.
• Check whether the connected Bluetooth audio player supports Audio/
The connected Bluetooth
audio player cannot be
controlled.
• Disconnect and connect the Bluetooth player again.
"DEVICE FULL" The number of registered devices has reached its limit. Retry after
deleting an unnecessary device. ( 17, DEVICE DELETE)
"N/A VOICE TAG" Make sure the same voice as the registered voice tag is used.
"NOT SUPPORT" The connected phone does not support Voice Recognition feature.
"NO ENTRY" / "NO PAIR" There is no registered device connected/found via Bluetooth.
"ERROR" Try the operation again. If "ERROR" appears again, check if the device
supports the function you have tried.
"NO INFO" Bluetooth device cannot get the contact information.
"HF ERROR XX" / Reset the unit and try the operation again. If this does not solve the
"BT ERROR" problem, consult your nearest service center.
24
Bluetooth device.
device, then perform pairing again. ( 13)
Video Remote Control Profile (AVRCP). (Refer to the instructions of your
audio player.)

SPECIFICATIONS

FM Frequency Range
Usable Sensitivity
(S/N = 26 dB)
Quieting Sensitivity
(DIN S/N = 46 dB)
Frequency Response
(±3 dB)
Signal-to-Noise Ratio
(MONO)
Stereo Separation
(1 kHz)
AM Frequency Range
Usable Sensitivity
(S/N = 20 dB)
Laser Diode
Digital Filter (D/A)
Spindle Speed
Wow & Flutter
Frequency Response (±1 dB)
Total Harmonic Distortion
(1 kHz)
Signal-to-Noise Ratio
(1 kHz)
Dynamic Range
Channel Separation
87.9 MHz — 107.9 MHz
(200 kHz space)
8.2 dBf (0.71 μV/75 Ω)
17.2 dBf (2.0 μV/75 Ω)
30 Hz — 15 kHz
64 dB
40 dB
530 kHz — 1 700 kHz
(10 kHz space)
29 dBμ (28.2 μV)
GaAIAs
8 times over sampling
500 rpm — 200 rpm (CLV)
Below measurable limit
20 Hz — 20 kHz
0.01 %
: 110 dB
Other models: 105 dB
90 dB
85 dB