Installation; Laying Out The Support Bars And Brackets - Miele KM 404 Installation Instructions Manual

Laying out the support bars
and brackets
a Support brackets
b Support bars
c Slight gap between support bar and
countertop
d Bracket center line
The illustration shows the layout for
three combisets and their respective
support bars, b, and support brackets,
a, required for correct installation.
If more than three combisets are being
installed, add an additional 11
(290 mm) to the overall length of the cut
out for each additional combiset, or use
the table on the preceding page.

Installation

3
/ "
8
9