Overall View Of The Installation - Fujitsu Heat pump, split, single service Operation Manual

Heat pump, split, single service

2 Overall view of the installation

Your heat pump has been configured by your
installer. It is composed of the following main
elements:
- The outside unit is positioned, as its name
indicates, outside your dwelling and extracts
energy from the outside air.
- The hydraulic unit positioned in your boiler room,
cellar, garage or even your kitchen, transfers the
energy to the heating circuit (and the domestic hot
water).
- T h e o u t d o o r s e n s o r d e t e c t s t h e o u t s i d e
temperature.
Optional equipment:
- Room thermostat
- Remote control
Heat pumps are systems that can be connected to
any form of low temperature heat distribution
systems: the heat captured by the heat pump can
therefore be used in different ways:
- Floor-heating systems
- Radiators or warm fan coil heaters
- Domestic hot water (DHW)
Outdoor
sensor
or
The outside unit
Figure 1 - Overall view of the configuration of a complete installation
Instruction manual "1353-EN"
Room Remote
thermostat control
or/and
The hydraulic unit
Control options
Options
depending
on the system
configurations
2nd circuit kit
DHW kit
Boiler
connexion kit
Heating circuit
Floor heating system
Heating circuit
Radiators or
fan convectors
DHW tank
(with electrical
back-up heating)
5