Wake On Lan - Draytek Vigor 2925 Series User Manual

Available settings are explained as follows:
Item
Enable IGMP Proxy
Enable IGMP Snooping
Refresh
Group ID
P1 to P5
After finishing all the settings here, please click OK to save the configuration.
4 . 1 1 . 8 W a k e o n L
4 . 1 1 . 8 W a k e o n L
A PC client on LAN can be woken up by the router it connects. When a user wants to wake up
a specified PC through the router, he/she must type correct MAC address of the specified PC
on this web page of Wake on LAN (WOL) of this router.
In addition, such PC must have installed a network card supporting WOL function. By the
way, WOL function must be set as "Enable" on the BIOS setting.
Available settings are explained as follows:
Item
Wake by
Description
Check this box to enable this function. The application of
multicast will be executed through WAN port. In addition,
such function is available in NAT mode.
Check this box to enable this function. Multicast traffic will
be forwarded to ports that have members of that group.
Disabling IGMP snooping will make multicast traffic
treated in the same manner as broadcast traffic.
Click this link to renew the working multicast group status.
This field displays the ID port for the multicast group. The
available range for IGMP starts from 224.0.0.0 to
239.255.255.254.
It indicates the LAN port used for the multicast group.
A N
A N
Description
Two types provide for you to wake up the binded IP. If you
choose Wake by MAC Address, you have to type the
correct MAC address of the host in MAC Address boxes. If
you choose Wake by IP Address, you have to choose the
correct IP address.
319
Vigor2925 Series User's Guide