Download Print this page
Kenwood TK-190 Pricing And Specification Manual

Kenwood TK-190 Pricing And Specification Manual

Low band portable radio
Hide thumbs Also See for TK-190:

Advertisement

Kenwood USA Corporation
• 16 Channel Capacity
• Wide-Band Coverage
• 7-Character Invert Display
• Priority Scan
• Programable Power Per Channel
• 5 Programmable Keys
MODEL
Heavy-duty Spring-action Belt Clip, Channel Selector Mechanical stop and dressing plate included -
TK-190K
VHF Low Band 29.7 – 37.0 MHz 6W, 16 Channels
TK-190K2
VHF Low Band 35.0 – 50.0 MHz 6W, 16 Channels
- The physical condition of the antenna may affect the radio's performance.
- If the original KRA-21 antenna is worn, bent or damaged, immediately have your
Kenwood authorized dealer replace the antenna with a new, properly adjusted KRA-21
antenna.
- Failure to follow these instructions may cause poor performance, damage to your
transceiver, and may also place excess transmitter energy on the metal portions of your
radio, which could make the transceiver uncomfortable to handle when transmitting.
- When transmitting, if your hand feels uncomfortable, contact your Kenwood dealer for
a transceiver inspection, and possible antenna replacement.
ANTENNAS
Tunable VHF Low Band helical antenna 29.7-50MHz. (Note: Antenna band width is 1
1
KRA-21
MHz.)
BATTERIES AND CHARGERS
KNB-17A
1500 mAh, 7.2 VDC (4/5W), NiCd battery
Intrinsically Safe Battery 1500 mAH, 7.2 VDC (4/5W), NiCd battery
2
KNB-17BK
[Intrinsically Safe Option] - must order L-835.
7
KNB-21N
1600 mAh NiMH (more than 10 hours life @ 5-5-90) - requires KSC-24 charger. Note:
Not compatible with Kenwood NiCd chargers or earlier model leather cases.
7
KNB-22N
2100 mAh NiMH (more than 13 hours life @ 5-5-90) - requires KSC-24 charger. Note:
Not compatible with Kenwood NiCd chargers or earlier model leather cases.
2100 mAh NiMH battery - requires KSC-24 charger - [Intrinsically Safe Option] - must
7,8
KNB-22NC
order L-979.
AA Alkaline Refillable Battery Pack for TK-190/290/390/280/380 (12 AA Alkaline 9V)
3
KBP-4
Battery cells not incl.
Land Mobile Radio Division
Low Band Portable Radio
DESCRIPTION
Important Notice
Regarding the TK-190 Model Radios!
*** If this transceiver is programmed for more than one channel, the transmit
frequencies must be within a 500 kHz range.***
Price Guide
TK-190
• MIL-STD 810 C/D/E
• Internal Noise-Canceling Microphone
• Operator Selectable Tone/Code (OST)
• Recessed Emergency / Function Key
• Companded Audio
• "Programmable" MIL-SPEC Speak Mics
Antenna & Battery not included.
Page 1 of 4
July-07
LIST
642.00
642.00
40.00
67.00
100.00
60.00
70.00
117.00
41.00

Advertisement

loading

Summary of Contents for Kenwood TK-190

  • Page 1 - When transmitting, if your hand feels uncomfortable, contact your Kenwood dealer for a transceiver inspection, and possible antenna replacement.
  • Page 2 [Intrinsically Safe Approved Accessory] Earphone kit w/ 2.5mm plug for KCT-30, 48" Cable (black) KEP-4 [Intrinsically Safe Approved Accessory] MIL-SPEC, Noise canceling Speaker mic (For TK-190 low band use) 2, 6 KMC-25A [Intrinsically Safe Approved Accessory] 2-wire palm mic w/earphone, universal connector (Beige)
  • Page 3 Assemble KMB-16 with six KSC-20's/24's L-961 Assemble KMB-23 with six KSC-32K's (Rapid Rate, 120 Volt version only) Configure TK-190/290/390 for Intrinsically Safe (Must Order KNB-17BK) - Note: Please L-835 see end of this pricepages section for a list of Intrinsically Safe Accessories for this radio.
  • Page 4 Screws also available from Parts Dept.: Part # N99-2004-05. KMC-25 is not compatible with the TK-190 due to the effects of RF on it at low band frequencies; the KMC-25A is the compatible model. The KMC-26 Speaker microphone with antenna connector CANNOT be used due to the inadequate ground plane properties on a speaker microphone at low band frequencies (the TK-190 does not have an RF pin on its accessory connector).