Installing The Usb Driver - Sony Cyber-Shot DSC-P9 Operating Instructions Manual

filename[D:\Documents and Settings\YAMANE\My Documents\WORKS\DSCP92\3082719111\3082719111DSCP92UC\02GB-
DSCP92UC\13adv.FM]
01cov.book Page 75 Tuesday, February 18, 2003 3:07 PM

Installing the USB driver

When using Windows XP, you need not
install the USB driver.
Once the USB driver is installed, you need
not install the USB driver.
a Turn on your computer, and
insert the supplied CD-ROM
into the CD-ROM drive.
Do not connect your camera to
your computer at this time.
The model selection screen appears. If
it does not appear, double-click
(My Computer) t [ImageMixer] in
that order.
b Click [Cyber-shot] on the
model selection screen.
The installation menu screen appears.
c Click [USB Driver] on the title
screen.
The "InstallShield wizard" screen
appears.
d Click [Next]. When the
"Information" screen appears,
click [Next].
The USB driver installation starts.
When the installation is completed, the
screen informs you of completion.
masterpage:Right
e Click [Yes, I want to restart my
computer now], then click
[Finish].
Your computer restarts. Then, you can
establish USB connection.
model name1[DSC-P92]
[3-082-719-11(1)]
75