Control Of A Different Device With The Accessory Remote Controller; Register The Setup Codes For Your Audio And Video; Operating Other Devices - Kenwood DVR-605 Instruction Manual

Control of a different device with the accessory remote controller

Register the setup codes for your audio and video

The devices which can be set up are TV, VCR, SAT (satellite tuner), and CABLE.
1 Press and hold the SOURCE ( ) key.
You must hold down the SOURCE
( ) key until you reach step 4.
2 Use the numeric keys to enter the
setup code.
3 Press the device key to assign the
setup code.
4 Release the SOURCE ( ) key.
5 Press the SOURCE ( ) key, CH +/–
keys, etc. to test the code.

Operating other devices

1 Press one of device keys for
operation.
DVD/CD TUNER SAT
BAND
VCR CABLE TV
SOURCE
1 2 3
4 5 6
7 8 9
PGM CLEAR
+100 0 +10
DVD/CD TUNER SAT
BAND
VCR CABLE TV FRONT
AUX
2 Press SOURCE
the device on.
FRONT
AUX
÷ You can assign VCR, CABLE, or SAT preset codes to the
FRONT device key.
÷ If you input a setup code that cannot be assigned to the
selected device key, the key's original setting is re-
tained.
3 Press device operate key.
key to turn
(Keys which can be used to
operate connected devices
SOURCE
57
DVR-605/DVR-6100/DVR-6100K (EN)
´)